What is the production process of LSAW welded steel tube?

Jan 22, 2026
James Park
James Park
Supply Chain Analyst optimizing the global supply chain for precision steel tubes and automotive components.

As a supplier of welded steel tubes, I'm often asked about the production process of Longitudinally Submerged Arc Welded (LSAW) steel tubes. In this blog, I'll walk you through the detailed steps of LSAW welded steel tube production, and also mention some related products that we offer.

1. Raw Material Preparation

The journey of an LSAW welded steel tube begins with high - quality steel plates. These plates are carefully selected based on various factors such as chemical composition, mechanical properties, and thickness. We source our steel plates from reliable steel mills. The chemical composition of the steel is crucial as it determines the tube's strength, ductility, and corrosion resistance. For example, carbon content affects the strength and hardness of the tube, while elements like chromium and nickel enhance corrosion resistance.

The steel plates are then inspected for surface defects, flatness, and dimensional accuracy. Any plates that do not meet our strict quality standards are rejected. Once approved, the plates are cut to the appropriate width according to the specifications of the final tube. This cutting is usually done using advanced cutting machines, which ensure a clean and precise cut.

2. Edge Preparation

After the steel plates are cut to the right width, edge preparation is carried out. The edges of the plate where the welding will take place are beveled. This beveling is essential as it allows for better penetration of the welding material and ensures a strong weld joint. The angle and shape of the bevel depend on the welding process and the wall thickness of the tube.

There are different methods for edge preparation, such as mechanical machining and thermal cutting. Mechanical machining uses tools like milling machines to create a smooth and precise bevel. Thermal cutting, on the other hand, uses high - energy sources like plasma or oxy - fuel to cut the edges. We use a combination of these methods to achieve the best results.

3. Forming

The next step is forming the flat steel plate into a cylindrical shape. This is typically done using a press - bending machine. The steel plate is gradually bent until the two edges meet, creating a continuous cylinder. The forming process requires careful control to ensure that the tube has a uniform diameter and roundness.

During forming, the plate is often pre - bent at the edges to compensate for the elastic recovery of the steel. This helps to achieve a more accurate final shape. The forming process is also monitored to prevent any wrinkling or cracking of the steel plate.

Cold Drawn Welded TubesCold Drawn Welded Tubes

4. Welding

Welding is the heart of the LSAW tube production process. Longitudinal submerged arc welding is a high - quality welding method that produces strong and reliable welds. In this process, the electrodes are submerged in a layer of flux, which protects the weld pool from atmospheric contamination.

The welding is carried out in multiple passes. First, the inner seam is welded. A welding head moves along the inner side of the tube, depositing molten metal to form the weld. After the inner seam is welded, the tube is flipped, and the outer seam is welded in the same way. The welding parameters, such as welding current, voltage, and welding speed, are carefully adjusted to ensure a good quality weld.

The quality of the weld is crucial for the performance of the tube. Any defects in the weld, such as porosity, lack of fusion, or cracks, can significantly reduce the strength and integrity of the tube. Therefore, we use advanced non - destructive testing methods, such as ultrasonic testing and radiographic testing, to inspect the welds for defects.

5. Nondestructive Testing (NDT)

After welding, the tubes undergo a series of nondestructive testing procedures. Ultrasonic testing (UT) is used to detect internal defects in the weld and the base metal. The ultrasonic waves are sent through the tube, and any reflections from defects are detected by the receiver.

Radiographic testing (RT) is another important NDT method. In this process, X - rays or gamma rays are used to create an image of the internal structure of the tube. This allows us to detect any hidden defects, such as cracks or porosity, that may not be visible on the surface.

Magnetic particle testing (MT) is used for detecting surface and near - surface defects in ferromagnetic materials. The tube is magnetized, and magnetic particles are applied to the surface. Any defects will cause the magnetic field to distort, and the particles will accumulate at the defect site, making it visible.

6. Sizing and Straightening

Once the tubes have passed the NDT tests, they are sized and straightened. Sizing is done to ensure that the tube has the correct outer diameter and wall thickness. This is usually achieved by passing the tube through a series of sizing rolls.

Straightening is necessary because the welding process can cause the tube to become slightly bent. We use straightening machines to remove any curvature and ensure that the tube is straight within the specified tolerance. The straightening process is carefully controlled to avoid over - stretching or damaging the tube.

7. End Finishing

The ends of the tube are then finished to meet the requirements of the customer. This may include beveling the ends for welding connections or threading the ends for screw - type connections. The end finishing process is carried out with high precision to ensure a proper fit and connection.

8. Coating and Packaging

To protect the tube from corrosion during storage and transportation, a coating is applied. There are different types of coatings available, such as epoxy coatings, polyethylene coatings, and zinc coatings. The choice of coating depends on the application and the environment in which the tube will be used.

After coating, the tubes are carefully packaged to prevent damage during handling and shipping. They are usually bundled together and wrapped in protective materials.

Related Products

In addition to LSAW welded steel tubes, we also offer Cold Drawn Welded Tubes, Shock Absorbor Welded Steel Tube, and Shock Absorbers Tubes. These products are widely used in various industries, such as automotive, construction, and machinery.

If you are interested in our LSAW welded steel tubes or other related products, we invite you to contact us for procurement and negotiation. Our team of experts is always ready to assist you in finding the right products for your specific needs.

References

  • "Steel Tube Technology Handbook".
  • Various industry - specific research papers on welding and tube production processes.