The Following Methods Verify That The Shock Absorbor Tube Is Working Well.

In order to quickly attenuate the vibration of the frame and the body, and improve the ride comfort and comfort of the car, the Shock Absorbor Tube is generally installed on the car suspension system, and the Shock Absorbor Tube is widely used in the car. Shock Absorbor Tube is a vulnerable part of the car. The Shock Absorbor Tube works well and will directly affect the stability of the car and the life of other parts. Therefore, we should make the Shock Absorbor Tube work well. The following methods verify that the Shock Absorbor Tube is working well.

Let the car park for 10km on the road with poor road conditions and stop. Touch the Shock Absorbor Tube shell by hand. If it is not hot enough, there is no resistance inside the Shock Absorbor Tube. The Shock Absorbor Tube does not work. At this point, you can add the appropriate lubricant, and then test, if the shell is hot, the Shock Absorbor Tube is lack of oil inside, should be enough oil; otherwise, the Shock Absorbor Tube is invalid; press the bumper hard, then release, If the car has 2 or 3 jumps, the Shock Absorbor Tube works well. When the car is driving slowly and braking urgently, if the car vibrates more severely, it indicates that there is a problem with the Shock Absorbor Tube; remove the Shock Absorbor Tube and erect it. And clamp the lower end connecting ring on the vise, and pull the damping rod several times. At this time, there should be stable resistance. The resistance to pull up should be greater than the resistance when pressing down. If the resistance is unstable or no resistance, It may be that the Shock Absorbor Tube is out of oil or the valve parts are damaged and should be repaired or replaced.