CBIES AUTOMOTIVE|What Is The Quenching And Tempering Effect Of Seamless Steel Pipes?

Dec 19, 2022

#45 seamless steel pipe is mainly used to support transmission parts, transmit torque, and bear load. They are subjected to tension, compression, bending, torsion, or shearing, and some surfaces have friction, requiring certain abrasion resistance. In short, parts work under various compound stresses.

 

#45 seamless steel pipes are mainly structural parts of various machines and mechanisms, such as shafts, connecting rods, studs, gears, etc... They are widely used in manufacturing industries such as machine tools, automobiles, and tractors. Especially for large components in heavy machine building, quenching and tempering treatment is used more. Therefore, quenching and tempering treatment of seamless steel pipe occupy a very important position in heat treatment.

 

CBIES AUTOMOTIVE is an exporter of auto parts and components. Seamless steel pipes are mainly used in automobile exhaust systems, 80% of which are ferritic stainless steel. The company's main products include but are not limited to exhaust pipes, chassis pipes, anti-collision bars, seat pipes, and instrument beam pipes and other pipe products.

 

 

Quenching and tempering of seamless steel pipes usually refer to the heat treatment process of quenching + high-temperature tempering to obtain tempered sorbate.

In its chemical composition, the carbon (C) content is 0.42-0.50%, the Si content is 0.17-0.37%, the Mn content is 0.50-0.80% and the Cr content is ≤0.25%.

Recommended heat treatment temperature: normalizing 850°C, quenching 840°C, tempering 600°C.

 

Ordinary seamless steel pipes are generally made of high-quality carbon structural steel, which is not very hard and easy to cut. It is often used in mold-making templates, pointed heads, guide posts, etc., but heat treatment is required.

 

A. After quenching and before tempering, the hardness of the steel is greater than HRC55, which is qualified.

The highest hardness for practical application is HRC55 (high-frequency quenching HRC58).

 

B. Steel materials shall not adopt heat treatment processes such as carburizing and quenching.

The parts have good comprehensive mechanical properties after quenching and tempering and are widely used in various important structural parts, especially connecting rods, bolts, gears and shafts working under alternating loads. But the surface hardness is low and not wear-resistant. Tempering + surface quenching can be used to improve the surface hardness of parts.

 

Carburizing treatment is generally used for heavy parts with wear-resistant surfaces and impact-resistant cores, and its wear resistance is higher than quenching and tempering + surface quenching. The carbon content of the surface layer is 0.8-1.2%, and the core layer is generally 0.1-0.25% (0.35% in exceptional cases). After heat treatment, the surface can obtain high hardness (HRC58-62), and the core has lower hardness and impact resistance.

 

After quenching and tempering treatment of seamless pipes, the produced parts have good comprehensive mechanical properties.

CBIES-AUTO-PART-Analysis-of-steel-quality