Hebei CBIES Automotive Parts Co., Ltd. is one of the reliable manufacturers and suppliers in China. As a specialized factory, we focus on manufacturing aluminium coated tube with consistent quality, competitive pricing, and reliable supply for global markets.
Specification
| OD： 16-133mm | Thickness：1.2-2.3mm |
| Production Standard： JIS G3314,ASTM A463 / A463M ,EN10346etc., | Grade： SA1C,SA1D,SA1E,FS,DDS,EDDS,DX53D,DX54D |
| Alu coating： 40g/40g,60g/60g,80g/80g,120g/120g | Raw Material： POSCO |
| Application： Automobile exhaust | Automobile brands： Renault, TOYOTA, JAC, Chery, Geely, etc., |
| Cooperation auto parts factory：Magneti Marelli(MM), WEIFU, GAC, TOYOTA |
Packing and Delivery
The packaging and warehousing of all the inspection and delivery, ensuring the safety of products should strictly comply with standards products for customers. We Provide packages and requirements Specially-assigned persons are paper, film, plastic wrap, shrink film, and pallet, available tobe in charge of unified management cartons. etc
Inspection Instruments
Mechanical properties (stretching, hardness) test equipment, process performance (squashing, crimping, flaring, reverse bending, flattening) Test equipment, air pressure, hydraulic test equipment, intergranular corrosion test equipment, grain size test equipment, non-destructive testing and other inspection equipment.
Characteristics Of Aluminized Steel Pipe
1. Thermal reflection property
The surface of the aluminized steel sheet is not only beautiful but also has excellent reflection performance. At a temperature below 500℃, it has about 80% reflectivity of light; The reflectivity in infrared is 95 percent. Therefore, Aluminium sheets can be made into highly efficient insulation barriers or heat reflectors in high-temperature applications.
2. Corrosion resistance
In the ion series, aluminum tends to be more resistive than Mn, Mo, Cr, W, Cd, Fe, and Zn. But because the aluminum oxide film itself has good stability, the surface corrosion resistance, in addition to some environmental conditions, is much better than the galvanized steel plate. In the hot dip plating process, the molten aluminum immediately reacts with oxygen in the air to form a protective layer of Al2O3, which makes the surface of the steel sheet passivated immediately. The protective layer itself is very stable and insoluble in water, and it heals itself even if the steel surface is later scratched. Therefore, the aluminum-plated sheet has a strong corrosion resistance to chemical corrosion.
3. Green environmental performance
The aluminized layer of aluminized steel sheet is composed of elements such as aluminum, silicon, and iron. Some authoritative institutions under the Japanese government confirmed that the aluminized steel sheet without chemical passivation conforms to the food hygiene law and is harmless to human health, and can be directly used in food processing. The test report of many professional bodies proves that it is harmless to human body and is an environmentally friendly product. The aluminum plate is completely recyclable.
Raw Material For Aluminised Mild Steel Tubes Pipe For Exhaust
An aluminized steel plate is a kind of cold rolled steel plate as the base material, after continuous hot dip plating processing, the surface coating is an aluminum-silicon alloy steel plate.
An aluminized steel plate is as easy to weld as a traditional plated steel plate, but the welding conditions are different.
Because the aluminum metal is relatively soft, it is easy to combine, and because of its strong electrical conductivity, the thermal conductivity of the welded part is better than that of the cold rolled steel plate.
The coating of aluminized steel plate is higher than the melting point of galvanized steel plate, it is not easy to flow, and the melting area is small, so it is not necessary to use the current of welding galvanized steel plate.
At the same time, the harmful smoke produced in the welding process is very little, which can effectively protect the environment.
Metal electrode inert gas welding (MIG) or MIG "short arc" welding is often protected with Ar gas, so as to improve the stability of the welding arc, so that the welding sputtering is significantly reduced, and the appearance of the welding seam is tidy and good-looking.
MIG or MIG "short arc" welds usually have low welding voltages (about 15 to 24V), and titanium-type electrodes are used for conventional welds.
Welding Manner
When high-frequency or low-frequency welding technology is used to process aluminized steel plate into pipe and other products, the edge of the steel plate should be wiped before welding.
Spot welding of aluminized steel plate requires higher current and closer monitoring of the welding process than cold rolled steel plate. At the same time, electrode maintenance is very important and should be corrected at any time to prevent deformation of the contact surface.
The effective way to extend the service life of the electrode is to properly calibrate the welding nozzle and effective water cooling. The general minimum cooling water is 7 L/min and the water temperature is not more than 25 degrees Celsius.
Due to the conductive and thermal conductivity of the coating, a larger welding current is required. The spherical electrode of hard copper alloy shall be used.
The following table is the welding conditions of spot welding of aluminized steel plate, which is for reference only (general commercial grade, the coating amount is 40g/m2 on both sides). Users should adjust it according to the actual working conditions.
The intermittent current is better than the continuous current in the seam welding process of aluminized steel plates. The copper alloy knurling wheel is best used in the seam welding wheel because the knurling wheel can prevent adhesion of the steel plate coating and maintain a constant working face width, so it does not need to be corrected. The welding part of the electrode wheel can be rinsed with water to provide sufficient cooling.
Hot Tags: aluminium coated tube, China, manufacturers, suppliers, factory, customized, price, quotation, made in China, EN 10346 Aluminum Coated Tube, JIS G3314 Aluminum Coated Tube, Exhaust Tube, Aluminum Coated Exhaust Tube, Aluminium Coated Steel Tube, ASTM A463 463M Aluminum Plated Tube